Hi from Manila, Philippines

Madmen · 06-24-2016, 11:58 PM

Yes we do have Mazda rotaries here although they are imported and never dealer sold. I've successfully shoehorned an FD3S into a Miata and use it for our local Miata club racing where they had to make a special "open" class just for me. I own and run a small shop doing mostly exotics that have died in a garage where the owner just wants his car running. Last project was a Lotus Esprit S1. I've done a 1st gen RX7 and fell in love with it. Owner not selling and no longer returns my test msgs. I recently found one in a big garage with other cars. It was a rust bucket, not running, tires flat, brakes stuck, hood about rusted out, interior needing lots of work. Only thing going for it was that the engine turned by hand and it was a complete engine plus good papers. I gave what I thought was a very extremely generous offer ($2K) and I got sneered at.

Still looking. Thanks and greetings to all.

speedjunkie · 06-25-2016, 01:32 AM

Welcome!

That's $2000 in US dollars?? I guess they must be rare over there because here in the US that would go for a few hundred TOPS, due to the condition.

Here is a link to all the manuals you'll ever need, in case you don't have them yet.

http://foxed.ca/index.php?page=rx7manual

Madmen · 06-26-2016, 08:05 PM

Hi Speedjunkie. Yes very rare here thus the premium. However, tomorrow I'll know whether I am he owner of a running rx7 that nly needs a steering box replacement. Price I offered was $8k since it looked really well kept and in very good running condition. I added what I thought was the "I want it badly" to the price. And thanks for the link to the manuals. Very greatly appreciated. Pics to follow if I do get the car. Thanks a lot for the welcome.

speedjunkie · 06-29-2016, 03:04 AM

Sweet! Good luck snagging that car!

Madmen · 06-30-2016, 07:09 PM

Speedjunkie! Picking up the 1981 rx7 tomorrow! Pics when I bring it to my shop for a thorough inspection. You brought luck!

speedjunkie · 07-04-2016, 06:59 PM

I don't know that I'd jump to THAT conclusion hahaha. That's awesome though. Can't wait to see pics.

Madmen · 07-05-2016, 01:15 AM

Hi Speedjunkie!

Here she is. Just got her into my shop yesterday. Needs work. There's some rust under the batt area. Needing all the weatherstrip. Paint needs touching up. All the bushings. The idlers. Engine will be torn down and rebuilt...by me. Is it ok if I ask questions like...porting when the engine is down?IMG_3127.jpg

IMG_3128.jpg

IMG_3126.jpg

speedjunkie · 07-08-2016, 03:20 AM

Wow, that is super clean! Good choice!

I don't know much about porting, but I'm sure others on here do.

Madmen · 07-10-2016, 09:43 PM

Thanks speedjunkie. Interior is all intact and clean. Quick question. Can the "big console box" fit the models without it?

speedjunkie · 07-12-2016, 12:06 AM

I have no idea haha. I don't know what you mean by big console box, or which models have it and which don't. I don't know much about SA/FBs or FCs.

Madmen · 07-13-2016, 12:37 AM

No problem speedjunkie. I got myself on the FB specific forum. Thanks for the nice welcome!!!

t_g_farrell · 07-13-2016, 06:58 AM

Quote:

Originally Posted by Madmen

Thanks speedjunkie. Interior is all intact and clean. Quick question. Can the "big console box" fit the models without it?

Explain with pictures and I can probably figure it out for you. Not sure what
the big console box refers to.

Madmen · 07-14-2016, 09:01 PM

Let's see if I can add the page from the parts manual.

speedjunkie · 07-15-2016, 03:27 AM

I didn't know there were models that didn't have that.

t_g_farrell · 07-15-2016, 07:28 AM

Yes that larger console can be used in place of the smaller one. It was an option and came
with it when electric windows were involved I think.

07-15-2016, 07:28 AM	#15
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	Yes that larger console can be used in place of the smaller one. It was an option and came with it when electric windows were involved I think. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

06-25-2016, 01:32 AM	#2
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Welcome! That's $2000 in US dollars?? I guess they must be rare over there because here in the US that would go for a few hundred TOPS, due to the condition. Here is a link to all the manuals you'll ever need, in case you don't have them yet. http://foxed.ca/index.php?page=rx7manual

06-26-2016, 08:05 PM	#3
Madmen Rotary Fan in Training Join Date: Jun 2016 Posts: 56 Rep Power: 10	Hi Speedjunkie. Yes very rare here thus the premium. However, tomorrow I'll know whether I am he owner of a running rx7 that nly needs a steering box replacement. Price I offered was $8k since it looked really well kept and in very good running condition. I added what I thought was the "I want it badly" to the price. And thanks for the link to the manuals. Very greatly appreciated. Pics to follow if I do get the car. Thanks a lot for the welcome.

06-29-2016, 03:04 AM	#4
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Sweet! Good luck snagging that car!

06-30-2016, 07:09 PM	#5
Madmen Rotary Fan in Training Join Date: Jun 2016 Posts: 56 Rep Power: 10	Speedjunkie! Picking up the 1981 rx7 tomorrow! Pics when I bring it to my shop for a thorough inspection. You brought luck!

07-04-2016, 06:59 PM	#6
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I don't know that I'd jump to THAT conclusion hahaha. That's awesome though. Can't wait to see pics.

07-05-2016, 01:15 AM	#7
Madmen Rotary Fan in Training Join Date: Jun 2016 Posts: 56 Rep Power: 10	Hi Speedjunkie! Here she is. Just got her into my shop yesterday. Needs work. There's some rust under the batt area. Needing all the weatherstrip. Paint needs touching up. All the bushings. The idlers. Engine will be torn down and rebuilt...by me. Is it ok if I ask questions like...porting when the engine is down?IMG_3127.jpg IMG_3128.jpg IMG_3126.jpg

07-08-2016, 03:20 AM	#8
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Wow, that is super clean! Good choice! I don't know much about porting, but I'm sure others on here do.

07-10-2016, 09:43 PM	#9
Madmen Rotary Fan in Training Join Date: Jun 2016 Posts: 56 Rep Power: 10	Thanks speedjunkie. Interior is all intact and clean. Quick question. Can the "big console box" fit the models without it?

07-12-2016, 12:06 AM	#10
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I have no idea haha. I don't know what you mean by big console box, or which models have it and which don't. I don't know much about SA/FBs or FCs.

07-13-2016, 12:37 AM	#11
Madmen Rotary Fan in Training Join Date: Jun 2016 Posts: 56 Rep Power: 10	No problem speedjunkie. I got myself on the FB specific forum. Thanks for the nice welcome!!!

07-15-2016, 03:27 AM	#14
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I didn't know there were models that didn't have that.