Griffith Performance Engineering FD3S Rx-7 Custom Seat Mounts Bases

afgmoto1978 · 02-18-2014, 12:43 AM

These seat mounts can either accommodate Sparco/Recaro/etc seat rails or aftermarket seats with bottom mount base configurations. Additionally the seat mounts come with accommodations for 5/6th point racing sub-harness attachment points as well as OEM seat belt latch relocation bracket so you can still use your OEM seat belts.

Pricing starts at $165 each (left or right) or $300 per pair if 10 people sign-up and put $100 deposit. If I can get 20 people signed up pricing will be $140 each or $260 per pair. Note shipping is not included.

If you want non adjustable racing seat mounts see my other seat mount GB post. Tall racer do apply.

If you're serious about getting one or a pair send $100 deposit to PayPal Account: afgmoto1978@gmail.com, state what you want (left, right, pair and if you want OE seat belt latch bracket ($25 each)).

I will be setting the deadline to March 7th for the deposits. The seat mounts should be ready to ship by April 18th

Fritz Flynn · 02-18-2014, 01:28 PM

edit

afgmoto1978 · 02-18-2014, 09:15 PM

Photographs of original prototype with Bride Low Max Seats

afgmoto1978 · 02-18-2014, 09:17 PM

More Prototype Photos

RENESISFD · 02-19-2014, 12:02 PM

Deposit sent.

***TitaniumTT*** · 02-19-2014, 12:19 PM

Bigger pics because sometimes they take a while to load....

speedjunkie · 02-23-2014, 01:11 AM

So this is how they're still made? They look like one-piece in the CAD drawings I saw before. And I didn't realize you could use reclining seats with them. Not to mention it looks like these Bride's fit without modifying the shoulder bolster like on the Evo2s. Interesting.

I keep forgetting to send a deposit for these lol.

EDIT: Just sent the deposit.

afgmoto1978 · 02-23-2014, 01:56 PM

Eric, I have three different seat mount designs, this design allows for a seat rail, spraco/evo side mount plates or bottom mount seats like the Low Max pictured. The other designs are for racing seats only.

speedjunkie · 02-25-2014, 12:09 AM

Oh OK, gotcha. So which one did I put a deposit on? lol

afgmoto1978 · 03-04-2014, 01:24 AM

Got you covered

02-19-2014, 12:19 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Bigger pics because sometimes they take a while to load.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-23-2014, 01:11 AM	#7
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	So this is how they're still made? They look like one-piece in the CAD drawings I saw before. And I didn't realize you could use reclining seats with them. Not to mention it looks like these Bride's fit without modifying the shoulder bolster like on the Evo2s. Interesting. I keep forgetting to send a deposit for these lol. EDIT: Just sent the deposit. Last edited by speedjunkie; 02-23-2014 at 01:42 AM.

02-18-2014, 01:28 PM	#2
Fritz Flynn The Newbie Join Date: Mar 2008 Posts: 29 Rep Power: 0	edit

02-19-2014, 12:02 PM	#5
RENESISFD Rotary Fan in Training Join Date: Jul 2011 Posts: 50 Rep Power: 14	Deposit sent.

02-23-2014, 01:56 PM	#8
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Eric, I have three different seat mount designs, this design allows for a seat rail, spraco/evo side mount plates or bottom mount seats like the Low Max pictured. The other designs are for racing seats only.

02-25-2014, 12:09 AM	#9
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Oh OK, gotcha. So which one did I put a deposit on? lol

03-04-2014, 01:24 AM	#10
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Got you covered