Feeler: Black S5 T2 seatbelt (complete) system, NY 14620

firzen · 11-26-2008, 04:56 AM

Greetings,

I figured I would ask the people around here first if there's any interest in these things. I have not decided on a price yet since I am not sure what the going rate is for a complete setup. Shipping would be a pain but I'd obviously ship if you'd pay for the expense.

I have not removed the setup yet and will take pictures if there is interest. I would prefer it go to somebody who want the entire setup for a restoration and will only seperate parts if I know there's no interest. Aside from the driver's side A-pillar (see below) and the fact that these need to be rebuilt, all other components are clean and in great condition.

Included parts:
2x A-pillar plastic (See note below)
2x B-pillar upper plastic
2x B-pillar lower plastic
1x Center console
Seatbelt slider rails
Retracting seatbelts
2x lap belts

I will include all hardware and bolts for the seatbelts for a full and complete conversion. Instructions for the seatbelts in case they fail along with supporting hardware will also be included.

Again, THESE BELTS HAVE NOT BEEN REBUILT. You can take them to the dealership for a free (albeit troublesome) warranty replacement. I can do these myself and then attempt to sell them but that would have to wait until snow disappears and I can no longer taste the salt on the road.

Note: The driver's A-pillar has an Autometer boost gauge mounted on it- this is the same setup you could see here. http://rx7.com/store/rx7/RPSingleMount.html

Thank you for looking.

djmtsu · 11-26-2008, 08:09 AM

I would rather you part it out! I need the a-pillar plastics.

firzen · 11-26-2008, 12:38 PM

^ Let's let this deal simmer for a while- I'm sure there's restoration freak out there that wants the whole set...

I'll give you dibs on the A-pillars if nobody bites.

Mazdaracer4fun · 01-03-2009, 11:23 PM

i could use the
"2x B-pillar upper plastic
2x B-pillar lower plastic"

firzen · 01-05-2009, 10:42 AM

^ I'll keep you in mind if I decide to part out. Thanks.

11-26-2008, 04:56 AM	#1
firzen Rotary Fanatic Join Date: Mar 2008 Posts: 231 Rep Power: 18	Feeler: Black S5 T2 seatbelt (complete) system, NY 14620 Greetings, I figured I would ask the people around here first if there's any interest in these things. I have not decided on a price yet since I am not sure what the going rate is for a complete setup. Shipping would be a pain but I'd obviously ship if you'd pay for the expense. I have not removed the setup yet and will take pictures if there is interest. I would prefer it go to somebody who want the entire setup for a restoration and will only seperate parts if I know there's no interest. Aside from the driver's side A-pillar (see below) and the fact that these need to be rebuilt, all other components are clean and in great condition. Included parts: 2x A-pillar plastic (See note below) 2x B-pillar upper plastic 2x B-pillar lower plastic 1x Center console Seatbelt slider rails Retracting seatbelts 2x lap belts I will include all hardware and bolts for the seatbelts for a full and complete conversion. Instructions for the seatbelts in case they fail along with supporting hardware will also be included. Again, THESE BELTS HAVE NOT BEEN REBUILT. You can take them to the dealership for a free (albeit troublesome) warranty replacement. I can do these myself and then attempt to sell them but that would have to wait until snow disappears and I can no longer taste the salt on the road. Note: The driver's A-pillar has an Autometer boost gauge mounted on it- this is the same setup you could see here. http://rx7.com/store/rx7/RPSingleMount.html Thank you for looking.

11-26-2008, 08:09 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	I would rather you part it out! I need the a-pillar plastics. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-26-2008, 12:38 PM	#3
firzen Rotary Fanatic Join Date: Mar 2008 Posts: 231 Rep Power: 18	^ Let's let this deal simmer for a while- I'm sure there's restoration freak out there that wants the whole set... I'll give you dibs on the A-pillars if nobody bites.

01-03-2009, 11:23 PM	#4
Mazdaracer4fun S4 INTO S5 Turbo II OWNER Join Date: Dec 2008 Location: Parma, Ohio 44130 Posts: 70 Rep Power: 17	i could use the "2x B-pillar upper plastic 2x B-pillar lower plastic"

01-05-2009, 10:42 AM	#5
firzen Rotary Fanatic Join Date: Mar 2008 Posts: 231 Rep Power: 18	^ I'll keep you in mind if I decide to part out. Thanks.