June 2010 Rotary of the Month

***ZGN*** · 07-12-2010, 01:29 PM

1979 Aussie Delivered Mazda RX-7 S1 - Location: Adelaide, Australia

Q: Congratulations to FIBREMAZ 13 BEEF / Alexis on winning Rotary Car Club's June 2010 Ride of the Month! Tell us about how you acquired this car?
A: I bought this car from a lawyer approimately 9 years ago in bone stock form

Q: Favorite stretch of road to drive your car on (location)?
A: Adelaide Hills (South Australia) plenty of twists and turns

Q: Whats the biggest reason you chose a rotary powered car to modify?
A: I was born into a Mazda family with both of my parents having owned Mazda's since the late 70's. My old man had an S1 Rx7 when I was young and that got me hooked

Q: What are the future plans on this car?
A: Not too much, perhaps repaint the enging bay at some stage

Q: What was the worst and best memory of this project?
A: Probably the 1st time I heard my car with my 1st PP 13b motor start up for best. Worst would be losing a wheel

Q: Any other hobbies besides cars?
A: Carbon Fibre, Technology in general

Q: Anyone you'd like to thank?
A: Boostworx, Mildren Race Engineering and my mate Ralston who is a wealth of knowledge and a highly skilled individual.

Q: Anything in the pipeline for another ROTM win?
A: Maybe my 1968 1500 Estate once it's sorted and had front end rapinted

Specifications and Mods:
Exterior - Respray in 300C metallic silver in '05
NOS tail light lenses/gaskets and front parkers
C/F Hood/cowel/headlight covers/rear 1/4 vent covers

Engine/driveline/cooling
Rx5 13B PP 48mm ports, S5T gearbox, lightened fly, H/D Extreme clutch
EFi Hardware 50mm T.B's/S5 injectors/Microtech ECU/Malpassi fuel reg
S3 Front stuts with coilovers 350Lb springs/KYB shocks/Noltec strut tops
FD calipers on FC slotted discs modified to suit
S3 diff with rebuilt LSD centre and calipers/slotted rotors
Whiteline sway bars 24mm front and 21mm rear
Custom lowered springs approx 90mm/KYB shocks

Interior
C/F doortrims/centre console/gearstick surround
Custom nightglow guages
Momo Race 320mm steering wheel
Sparco reclinable seats on modified SA22c rails

Thanks for

sbright66 · 07-12-2010, 01:36 PM

Very Nice car, Congrats!!!

el canito rotary · 07-14-2010, 08:00 PM

Congrats very good looking car

llRyOsUkEll · 07-14-2010, 08:26 PM

Congrats! sweet looking car

prrex4ever · 07-14-2010, 08:58 PM

Well deserved, congrats.

jr515 · 07-29-2010, 06:38 PM

beautiful car!

bailing · 07-29-2010, 07:59 PM

beautiful，I like it!

07-12-2010, 01:29 PM	#1
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	June 2010 Rotary of the Month 1979 Aussie Delivered Mazda RX-7 S1 - Location: Adelaide, Australia Q: Congratulations to FIBREMAZ 13 BEEF / Alexis on winning Rotary Car Club's June 2010 Ride of the Month! Tell us about how you acquired this car? A: I bought this car from a lawyer approimately 9 years ago in bone stock form Q: Favorite stretch of road to drive your car on (location)? A: Adelaide Hills (South Australia) plenty of twists and turns Q: Whats the biggest reason you chose a rotary powered car to modify? A: I was born into a Mazda family with both of my parents having owned Mazda's since the late 70's. My old man had an S1 Rx7 when I was young and that got me hooked Q: What are the future plans on this car? A: Not too much, perhaps repaint the enging bay at some stage Q: What was the worst and best memory of this project? A: Probably the 1st time I heard my car with my 1st PP 13b motor start up for best. Worst would be losing a wheel Q: Any other hobbies besides cars? A: Carbon Fibre, Technology in general Q: Anyone you'd like to thank? A: Boostworx, Mildren Race Engineering and my mate Ralston who is a wealth of knowledge and a highly skilled individual. Q: Anything in the pipeline for another ROTM win? A: Maybe my 1968 1500 Estate once it's sorted and had front end rapinted Specifications and Mods: Exterior - Respray in 300C metallic silver in '05 NOS tail light lenses/gaskets and front parkers C/F Hood/cowel/headlight covers/rear 1/4 vent covers Engine/driveline/cooling Rx5 13B PP 48mm ports, S5T gearbox, lightened fly, H/D Extreme clutch EFi Hardware 50mm T.B's/S5 injectors/Microtech ECU/Malpassi fuel reg S3 Front stuts with coilovers 350Lb springs/KYB shocks/Noltec strut tops FD calipers on FC slotted discs modified to suit S3 diff with rebuilt LSD centre and calipers/slotted rotors Whiteline sway bars 24mm front and 21mm rear Custom lowered springs approx 90mm/KYB shocks Interior C/F doortrims/centre console/gearstick surround Custom nightglow guages Momo Race 320mm steering wheel Sparco reclinable seats on modified SA22c rails Thanks for Attached Thumbnails __________________ Kevin Last edited by ZGN; 07-12-2010 at 01:55 PM.

07-12-2010, 01:36 PM	#2
sbright66 The Newbie Join Date: Nov 2009 Location: Charleston SC Posts: 26 Rep Power: 0	Very Nice car, Congrats!!! __________________ Steve Bright 1979 Spark Yellow 7 Charleston, South Carolina

07-14-2010, 08:00 PM	#3
el canito rotary Rotary Fanatic Join Date: Nov 2008 Posts: 351 Rep Power: 17	Congrats very good looking car

07-14-2010, 08:26 PM	#4
llRyOsUkEll The Newbie Join Date: Jan 2010 Location: alhambra, CA Posts: 8 Rep Power: 0	Congrats! sweet looking car

07-14-2010, 08:58 PM	#5
prrex4ever Rotary Fanatic Join Date: Oct 2008 Posts: 274 Rep Power: 17	Well deserved, congrats.

07-29-2010, 06:38 PM	#6
jr515 brap brap Join Date: May 2010 Location: Tampa, Fl. Posts: 5 Rep Power: 0	beautiful car!

07-29-2010, 07:59 PM	#7
bailing The Newbie Join Date: Jul 2010 Location: hi-tech zone of Zhengzhou, Henan province, China. Posts: 7 Rep Power: 0	beautiful，I like it!