ITBs

project86 · 04-09-2010, 02:05 PM

Does anyone know if anyone besides tweakit.net makes itbs for the 20b? id like to see something that incloses the injectors with the filter instead of exposing them.

djmtsu · 04-09-2010, 02:53 PM

Took 5 seconds.

http://www.tweakit.net/shop/product_...roducts_id=118

You're welcome.

project86 · 04-09-2010, 03:33 PM

Quote:

Originally Posted by project86

Does anyone know if anyone besides tweakit.net

Quote:

Originally Posted by djmtsu

Took 5 seconds.

http://www.tweakit.net/shop/product_...roducts_id=118

You're welcome.

thanks anyway

i know about the tweakit ones. i just didnt see a filter set up for the 20b. i know they sell one for the 13 itbs. i just dont really like the idea of the open area between the injector and the bell with no filter.

FerociousP · 04-09-2010, 04:00 PM

Quote:

Originally Posted by project86

thanks anyway

i know about the tweakit ones. i just didnt see a filter set up for the 20b. i know they sell one for the 13 itbs. i just dont really like the idea of the open area between the injector and the bell with no filter.

Quote:

Originally Posted by djmtsu

Took 5 seconds.

http://www.tweakit.net/shop/product_...roducts_id=118

You're welcome.

can I do it?....

....PWND....

You're welcome.

On topic: I do not know of any setups at this time.

project86 · 04-09-2010, 04:30 PM

haha thanks. i just thought id put a thread out there. i have seen a vid on youtube of a guy that has what im lookin for.. he probly made it custom though.

Whizbang · 04-09-2010, 07:21 PM

efi hardware might have something

project86 · 04-10-2010, 05:42 AM

thats perfect man! thanks much!

aaron_bc · 06-15-2010, 01:31 PM

Is there any company that makes a manifold for ITBs for a side port 20b? No going PP.

It's either find something bolt on, or run the 20b intake with a ported throttle body to keep things simple and cheap.

project86 · 06-15-2010, 02:28 PM

i would check out a single 90mm TB to start with. it will save you some coin and should be a good middle ground to the stock TB and ITBS. I believe RotaryWorks sells one.

aaron_bc · 06-15-2010, 04:26 PM

I may just get the LIM/UIM extrude honed and run a ported 20b throttle body.

04-09-2010, 02:05 PM	#1
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	ITBs Does anyone know if anyone besides tweakit.net makes itbs for the 20b? id like to see something that incloses the injectors with the filter instead of exposing them. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

04-09-2010, 02:53 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Took 5 seconds. http://www.tweakit.net/shop/product_...roducts_id=118 You're welcome. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

04-09-2010, 04:30 PM	#5
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	haha thanks. i just thought id put a thread out there. i have seen a vid on youtube of a guy that has what im lookin for.. he probly made it custom though. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

04-09-2010, 07:21 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	efi hardware might have something __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

04-10-2010, 05:42 AM	#7
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	thats perfect man! thanks much! __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

06-15-2010, 01:31 PM	#8
aaron_bc Rotary Fan in Training Join Date: Mar 2009 Posts: 33 Rep Power: 0	Is there any company that makes a manifold for ITBs for a side port 20b? No going PP. It's either find something bolt on, or run the 20b intake with a ported throttle body to keep things simple and cheap.

06-15-2010, 02:28 PM	#9
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	i would check out a single 90mm TB to start with. it will save you some coin and should be a good middle ground to the stock TB and ITBS. I believe RotaryWorks sells one. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

06-15-2010, 04:26 PM	#10
aaron_bc Rotary Fan in Training Join Date: Mar 2009 Posts: 33 Rep Power: 0	I may just get the LIM/UIM extrude honed and run a ported 20b throttle body.