|
Archives All the stickies in one place |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#31 | |
⊙⊙
|
![]()
__________________
Quote:
|
|
![]() |
![]() |
![]() |
#32 |
The Newbie
|
![]()
Read the info in the first couple of posts.. there is mention of the fly wheel nut being 54mm Hex wrench size but NOT the thread pitch specs. Anyone have that info? Presume it is the same as the eccentric shaft end threads, but I didnt find that also.
Someone? Also; Tension bolts(Short ribbed #10-E51B-N350) - M10 x 1.0P threads, thread Length is about 57mm from end, 281mm OAL, 274.5 Stem Length(including threads), 17mm HEX Wrench head size. Dowels - For 1 piece solid Length is 230mm, a good bore for a 1 piece drilled dowel is 8mm.. since the oil galley of the front is less than 5/16". You can add a 10mm Length of thread, M8 x 1.25P, on one side for removal purposes for the solid and drilled. Last edited by Nwar; 09-06-2018 at 10:42 PM.. |
![]() |
![]() |