|
Fabrication Show off the parts that you've built from scratch or highly modified |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#33 |
Rotary Fanatic
|
![]()
finally finished my ss header for my sp , the length is matched and its made from schedule 10 2 1/8' i.d stainless with weld ells for the mandrel bends . the wall thickness is about 1/8" . now i just need to weld out and finish the 3" exhaust .
|
![]() |
![]() |
#34 |
500hp club
|
![]()
I have an endless list of fabrication work that has gone into this but most recently getting the radiator and intercooler done it can't get any better than this radiator fitment
__________________
500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine |
![]() |
![]() |
#35 |
Home-brew Rotary
|
![]()
Made a turbo manifold for my brothers FD.
Short runners, SS pipe, CS flange. Welded with a Hobart ez Tig. First time Tig welding a manifold. Working on the first runner. ![]() Working on it. Bolted to flanges and another manifold to help with distortion. ![]() Pretty much finished, want to do a little bit more to it though. ![]() ![]() How its gonna go on the engine. ![]()
__________________
'89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily. |
![]() |
![]() |
#37 | |
Rotary Fanatic
|
![]() Quote:
My foot pedal died within a year, and they sent me a replacement no questions asked. I would also recommend ditching the factory torch and getting a quality one immediately. Something like a CK unit. |
|
![]() |
![]() |
#39 | |
Waffles - hmmm good
|
![]() Quote:
__________________
1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00 |
|
![]() |
![]() |
#40 |
Rotary Fanatic
|
![]()
Do you have a build thread? That's looking great!
|
![]() |
![]() |
#41 |
Lifetime Rotorhead
|
![]()
Calling this "fabrication" is a bit of a stretch, but if anyone is building up a rotary and is lacking the spendy tool needed to measure step wear on the plates, this little bracket thingy I made and a standard dial indicator will do the job rather well. All this is is a chunk of solid AL bar stock and an AL right angle piece bolted to it, that I bolted the dial indicator to. Pictures describe it better than words...
|
![]() |
![]() |
#42 |
500hp club
|
![]()
Sorry I didnt see your comment.
I do have a build threas on the other forum in the 20b section.
__________________
500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine |
![]() |
![]() |
#43 |
Rotary Tuner in Training
|
![]() |
![]() |