Rotary Car Club - View Single Post

FC3S Murray · 08-17-2009, 02:39 AM

Well just fixed the front pulley e-shaft bolt oil leak. Had a buddy stop by(project 86) because he helped build it and he wanted to hear it pur and I ended up putting him to work.

I had him hold the clutch in while I removed the front pulley bolt to apply some rtv to the o-ring and copper washer face.

Started her up again about 1/2 hour later and ZERO white smoke and no oil spitting all over my engine bay. I am high off of gas fumes.

Need sleep......I must have spent an hour at least tonight dousching out the sand from my vag after the scare.

08-17-2009, 02:39 AM	#179
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Well just fixed the front pulley e-shaft bolt oil leak. Had a buddy stop by(project 86) because he helped build it and he wanted to hear it pur and I ended up putting him to work. I had him hold the clutch in while I removed the front pulley bolt to apply some rtv to the o-ring and copper washer face. Started her up again about 1/2 hour later and ZERO white smoke and no oil spitting all over my engine bay. I am high off of gas fumes. Need sleep......I must have spent an hour at least tonight dousching out the sand from my vag after the scare. __________________ Same pig, new soul Last edited by FC3S Murray; 08-17-2009 at 02:42 AM.