Rotary Car Club - View Single Post

bbade · 08-08-2009, 01:45 PM

Little update, when Dave did the rebuild the following hoses were replaced:

n3a1-13-681a (hose)
n3a1-13-691a (hose)
n3a1-13-692 (hose, water)
n3a1-13-536 (hose)
n3a1-13-54x (hose)
n3a1-15-186b (upper rad hose)
n3a1-15-185b (lower rad hose)

I am not sure what each of those hoses are though

.

Anyway I finished installing SuperPro bushings in the front of my car about a week ago. I took it for a short drive to test the bushings and see if I could get the white smoke to come back, no dice. I also started it up several days later took it for a short drive and no smoke again. I did not push the car on either drive so I'm thinking the smoke only appears after a hard drive.

When I finish installing the SuperPro bushings in the rear I will take it for a hard drive to see if I get any white smoke again. In the meantime any suggestions as to possible things to look for?

Thanks again!

08-08-2009, 01:45 PM	#4
bbade Rotary Fanatic Join Date: Mar 2008 Location: Macungie, PA Posts: 163 Rep Power: 18	Little update, when Dave did the rebuild the following hoses were replaced: n3a1-13-681a (hose) n3a1-13-691a (hose) n3a1-13-692 (hose, water) n3a1-13-536 (hose) n3a1-13-54x (hose) n3a1-15-186b (upper rad hose) n3a1-15-185b (lower rad hose) I am not sure what each of those hoses are though . Anyway I finished installing SuperPro bushings in the front of my car about a week ago. I took it for a short drive to test the bushings and see if I could get the white smoke to come back, no dice. I also started it up several days later took it for a short drive and no smoke again. I did not push the car on either drive so I'm thinking the smoke only appears after a hard drive. When I finish installing the SuperPro bushings in the rear I will take it for a hard drive to see if I get any white smoke again. In the meantime any suggestions as to possible things to look for? Thanks again! __________________ Proud owner of a base 1993 Montego Blue FD. PFC, RB single tip, Koyo Radiator, KDR rebuilt motor, polished OEM front strut bar, FEED replica sideskirts, OEM 99 spec rear spoiler, SuperPro Bushings Many thanks to Dave at KDR for sparking my rotor addiction.