View Single Post
Old 07-13-2009, 01:45 PM   #12
ZachFD
Rotary Fan in Training
 
Join Date: Jul 2008
Posts: 40
Rep Power: 0
ZachFD is on a distinguished road
Quote:
Originally Posted by Signal 2 View Post
I did forget you mentioned that switch. Is it possible it's bypassing the high speed fan relays and your just stuck on a lower speed?
In my experience typically (but not always) if there is air in the system, you'll hear that boiling sound after shut down. And while the car is running you see spiking of temps...not so much a steady rise as you've described.
I also don't see how heatsoaking of the aluminum IC ducting could have anything to do with it.

But I can't think of anything else to suggest. Sorry.
hmm, after shutdown I do hear a bubbling sound that comes in groups.....ill shut the car off and after a minute or two ill hear brsh,bhrsp,bhrsp.........brsh,bhrsh, I thought it was water returning into the system from the overfill due to heat expansion/cooling

My buzzer never goes off, and my level is always full at the fill neck, so i figured theres no air in the system...however, is the AST supposed to be at a high point above the filler neck, because mine isn't
ZachFD is offline   Reply With Quote