Quote:
Originally Posted by Shadow24v
picked up the new starter today and its a MUCH beefier unit than the one i pulled out. about 1/2"-1" larger diameter on the motor casing and they helicoiled one of the bolt holes. the upper one i believe, that had the long bolt through the rear end plate and a nut to hold the starter in place. i'll see how it fits today, i don't foresee a problem but you never know lol
|
huh?
The upper bolt hole is a through hole. You're supposed to have a nut and bolt connect on the upper. If they helicoiled the lower, I could see that.