Rotary Car Club - View Single Post - 1st RX-7 to make it to Cherohala Skyway Overlook

My5ABaby · 04-21-2009, 05:11 PM

Picture 1 you can see how the odd body kit was attached. The kit overall looks a lot like the Finish Line kit that was a factory option.

Picture 2 shows the license plate lights mounted on the bumper, as opposed to the sides and integrated into the tail lights.

Picture 3 shows the odd tail lights. On marker setting all of the red areas lit up. However, when braking only the outside top ones lit up.

Picture 4 shows the VIN code. Note that it's JMZ and 000006

Picture 5 is the front turn signals. I think this is where the previous interior switch comes into play as they can be used as fogs or DRL. Not sure though.

04-21-2009, 05:11 PM	#11
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	Picture 1 you can see how the odd body kit was attached. The kit overall looks a lot like the Finish Line kit that was a factory option. Picture 2 shows the license plate lights mounted on the bumper, as opposed to the sides and integrated into the tail lights. Picture 3 shows the odd tail lights. On marker setting all of the red areas lit up. However, when braking only the outside top ones lit up. Picture 4 shows the VIN code. Note that it's JMZ and 000006 Picture 5 is the front turn signals. I think this is where the previous interior switch comes into play as they can be used as fogs or DRL. Not sure though. Attached Images __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." Last edited by My5ABaby; 04-21-2009 at 05:15 PM.