[Garfinkles Motor Works]

The master plate is made for the plate using the 2nd gen leading coil and the drilling jig is made .The master plate is made for the plate with all stock coils but the drilling jig is NOT made as of today . I will make the jig as soon as I can get the time .The plate with the sec gen coil has 10 theaded holes and four spacers ,the stock coil plate has 9 threaded holes and no spacers .Both plates have matching mounting holes ( 4) so the plates will interchange if needed . The plate for the sec gen coil is a small bit longer .If I made one plate that mounted both types of coils then there will need to be 13 threaded holes ,that will drive the cost up so that will not be considered . Plus the spacers .