Rotary Car Club - View Single Post

MaczPayne · 10-21-2008, 07:35 PM

Also: Consider the increased stress you will put on the clutch hydraulics if you go with a very aggressive pressure plate. You will encounter problems if the hydraulics are in anything but good condition. My personal choice would be a 6 puck sprung along with a not-so-aggressive pressure plate. To get the same clamping strength using a street-disc, you would need a heavier pressure plate.

10-21-2008, 07:35 PM	#8
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	Also: Consider the increased stress you will put on the clutch hydraulics if you go with a very aggressive pressure plate. You will encounter problems if the hydraulics are in anything but good condition. My personal choice would be a 6 puck sprung along with a not-so-aggressive pressure plate. To get the same clamping strength using a street-disc, you would need a heavier pressure plate. __________________ Johnson TA FC in the works!