[Einstein]

Greetings,
I have my motor apart on a bench at work. The question is: what can I do and still pass emissions? I was hoping to do emissions removal per RR and possibly DIY porting. I live in Cherokee county in Georgia. Here is what we have to pass.

All 1995 and older model year vehicles will receive a four-part inspection:

* A visual inspection of the catalytic converter to check for tampering or removal.
* ASM2 or Accelerated Simulation Mode Test - A dual-mode test including a 25/25 test = 25 percent load at 25 MPH and a 50/15 test = 50 percent load at 15 MPH.
* A tailpipe exhaust emission test.
* A fuel cap inspection to check for adequate seal.

The first and last are the easy ones. It's those darn middle ones that will probably get me.

Thanks in advance.