Rotary Car Club - View Single Post - Thermocouple and translator box for AIT signal

cewrx7r1 · 09-27-2008, 07:05 PM

According to the spec sheet for those:
Output = 10 mV per C.
Thus at 30C the output would be 300 mV.

The strock one runs off 5VDC and the resistant changes varies the voltage.
You would need another converter!

09-27-2008, 07:05 PM	#1
cewrx7r1 The Judge Join Date: Feb 2008 Posts: 196 Rep Power: 18	According to the spec sheet for those: Output = 10 mV per C. Thus at 30C the output would be 300 mV. The strock one runs off 5VDC and the resistant changes varies the voltage. You would need another converter!