Rotary Car Club - View Single Post

Polito Racing · 09-21-2008, 10:53 AM

hey guys my car has been down for 8 months thru all that time I have rebuilt and ported the engine and done some upgrades.

Here is what ive done or have added:

Engine rebuilt and ported.
T-66 dual ball bearing Turbocharger
custom made cast manifold
46mm wastegate
FMIC with 2.5" piping
profec B boost controller
LC-1 wideband 02 sensor
Haltech E6S
720/1600 Injectors
Koyo Radiator
silicone radiator hoses
3" free flow dual exhaust with apexi pipes
Aeromotive A1000 fuel pressure regulator
braided fuel lines (-6 size)
Pineaple Racing Oil pressure regulator Mod
mazdatrix silicone vaccum lines
autometer boost gauge
9mm Spark plug cables
walbro 255 fuel pump
ACT Street lite flywheel
ACT Max Extreme clutch kit
new alternator with dual belt pulley
3 MSD 6AL's

the car is at the shop right now getting the downpipe done. once i get it back Im putting on the radiator fan shroud and start the tunning. Here are the pics from the beginning to where its at now.

here is what it looked like when I first got it.

and the engine

some TLC!!!!

and I got this!!!

then got the S5 Tails and a spoiler

then decided to get another engine and start a rebuild for just in case, here is what it all looked like after disasembling it, cleaning and painting it.

then took the original engine out and swapped it out to another body I had to get it running and that way i could make some money to continue the project.

after that we got this

then added the 3 MSD's

here is the video of the first startup. sorry but the camera man was late on starting the recording.

http://s283.photobucket.com/albums/k...chostartup.flv

and here is where I stand as of now. I should pick up the car from the shop tomorow. It is there getting a custom downpipe done. I will install the fan shroud and the undertray and after that it will be all tunning and getting it in the road.

09-21-2008, 10:53 AM	#1
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC Posts: 87 Rep Power: 17	here is my buildup thread hey guys my car has been down for 8 months thru all that time I have rebuilt and ported the engine and done some upgrades. Here is what ive done or have added: Engine rebuilt and ported. T-66 dual ball bearing Turbocharger custom made cast manifold 46mm wastegate FMIC with 2.5" piping profec B boost controller LC-1 wideband 02 sensor Haltech E6S 720/1600 Injectors Koyo Radiator silicone radiator hoses 3" free flow dual exhaust with apexi pipes Aeromotive A1000 fuel pressure regulator braided fuel lines (-6 size) Pineaple Racing Oil pressure regulator Mod mazdatrix silicone vaccum lines autometer boost gauge 9mm Spark plug cables walbro 255 fuel pump ACT Street lite flywheel ACT Max Extreme clutch kit new alternator with dual belt pulley 3 MSD 6AL's the car is at the shop right now getting the downpipe done. once i get it back Im putting on the radiator fan shroud and start the tunning. Here are the pics from the beginning to where its at now. here is what it looked like when I first got it. and the engine some TLC!!!! and I got this!!! then got the S5 Tails and a spoiler then decided to get another engine and start a rebuild for just in case, here is what it all looked like after disasembling it, cleaning and painting it. then took the original engine out and swapped it out to another body I had to get it running and that way i could make some money to continue the project. after that we got this then added the 3 MSD's here is the video of the first startup. sorry but the camera man was late on starting the recording. http://s283.photobucket.com/albums/k...chostartup.flv and here is where I stand as of now. I should pick up the car from the shop tomorow. It is there getting a custom downpipe done. I will install the fan shroud and the undertray and after that it will be all tunning and getting it in the road. __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!)