Quote:
Originally Posted by WE3RX7
I would have to agree that the affects of using that additive in conjuction with distilled water and an AL safe coolant will be marginal. If anything, it'll tip closer to the alkaline level of the pH scale which is ultimately better than being acidic.
You maybe better with using a 60/40 though - it'll balance better IMHO. 50/50 would be good when not using that additive. How many ounces is that bottle? I know the stock coolant system is a little over two gallons I believe, we can probably figure this out, lol...
|
I think it's 16oz
Quote:
Originally Posted by Low Impedance
the other thing is that "close" neutral and neutral are still pretty different as far as science is concerned. Also things dont have over night either. Unless you have a Ph of like 11 or 12. But say its 8 or 6. Well your going to find yourself chemically reacting til things settle out.
|
8.3 is usually what happens when you mix distilled water and gylcol type anti-freeze together. I'll probably email RP with questions about it. (This is all going into the article about cooling. I just want to get my facts and stuff straight before typing it up)