Quote:
Originally Posted by jacobcartmill
you didn't simply "go efi," which I would consider installing a stock T2 longblock and haltech into your car.
you went "very complex custom EFI harness via mail order to mate several different custom parts together" and you're seeing the product of the multiplied risk biting you in the ass.
|
To elaborate on the components more:
-The TPS, it's an off-the-shelf GM part.
-The FFE trigger wheel sensor is a readily available part from any auto parts store as well. .
-(Mentioned earlier) "a custom LS1 coil-on-plug setup" is really just coils with short wire leads to the plugs, I got rid of the COP adapters.
-Like already mentioned, the injectors are Bosch and to my knowledge widely used. .
All parts mentioned are compatible with the SprintRE, I did my best to make sure of that.
The only roadblock I hit along the way when it came to compatibility was the idle air control. . My TB accepts a GM stepper motor design and a SprintRE will only control a two wire design. I knew this up front but it wasn't until recently that I got the idea to modify an OE 2nd gen BAC to use on my TB.