Quote:
Originally Posted by TitaniumTT
Really simple Zac, locate the FE-03 connector down by the mess over by the masters.
It's a 6 pin connector on the front harness. It will have a B/W and a W/B wire there. Pin them out to make sure they work properly. If they do, than any sort of connector to jump from the FE-03 connector over to the Alt will work just fine.
|
Thanks Brian! Regardless of whether I find a harness or not, I may do this. Just to clarify things, this is the wire I will run with a 150ohm resistor correct? What about a diode, I read that it's recommended if wired a certain way but I'm unsure if I need this if run to the wire in the connector mentioned. . . Schawry, I schtooped on deez thangz.
Quote:
Originally Posted by TitaniumTT
No need for custom harnesses here, as much as I love them  |
Well, this is really more of a want than a need since the thing is in rough shape. There are exposed wire to the transmission connectors, busted connectors, broken wire/terminals at connectors, and unnecessary/unused connectors.