Quote:
Originally Posted by FerociousP
Is your IAT sensor in the top hat part for the TB?
|
Yes
Quote:
Originally Posted by FerociousP
Obviously you want to get as close as you can to ambient, but both the hat and the intake pipe are going to heat up the air a little, especially as they get soaked.
|
Yep, really no way of avoiding this. . I can make it better by wrapping the header and getting a shield for the intake manifold but without either of those I'd say this is good.
Quote:
Originally Posted by FerociousP
Looks like the intake is doing a decent job, and you can mess around with trying to minimize any engine air, maybe temporarily taping off the opening for the washer bottle?
|
Already did this by temporarily sealing gaps with masking tape.
Quote:
Originally Posted by FerociousP
Did you keep any fresh air ducting into the box?
|
I kept the temporary drier duct in place.
Quote:
Originally Posted by FerociousP
Another 10deg isn't going to make a HUGE power diff on a NA car, but if you are this close might as well keep optimizing.
|
Yeah, I'm gonna play with the air feed some more. I have an idea of directing more air to the box and without capping off the brake cooling side.