Rotary Car Club - View Single Post

cewrx7r1 · 03-03-2008, 05:32 PM

There are two clockings. The CHRA should be clocked for best oil flow (top to bottom) if posible but it does not have to be pure verticle. If the fittings for oil or water have clearance problems, just rotate a little. But I would not have the oil lines off more than 45 degrees from vertical.

Clock the compressor housing for best fit of you pipes.

03-03-2008, 05:32 PM	#2
cewrx7r1 The Judge Join Date: Feb 2008 Posts: 196 Rep Power: 18	There are two clockings. The CHRA should be clocked for best oil flow (top to bottom) if posible but it does not have to be pure verticle. If the fittings for oil or water have clearance problems, just rotate a little. But I would not have the oil lines off more than 45 degrees from vertical. Clock the compressor housing for best fit of you pipes. Last edited by cewrx7r1; 03-04-2008 at 12:41 PM.