Quote:
Originally Posted by C. Ludwig
What is the trigger since last home value while cranking. Should be 30 at all times with the Renesis wheel. If it's not 30, you have a trigger issue. Contact me if that's the case.
|
This I'm unsure of, I didn't set the Haltech up. Jacob may know.
Quote:
Originally Posted by C. Ludwig
How are you checking for spark? Timing light or actually inserting a plug in a wire, grounding it, and visually confirming spark? Timing lights are finicky and may or may not strobe consistently. Visually verify spark with a plug.
|
Both, with a new plug grounded and with a timing light.
Quote:
Originally Posted by C. Ludwig
Are the plugs in the engine fouled? If they are, you may not get a light strobe and it certainly won't start.
|
The plugs are definitely bad, I ordered replacements which will arrive sometime today.
Quote:
Originally Posted by C. Ludwig
I told Jacob to space the sensor at .040". That should be good but confirm that with FFE. Their kits are pretty darn consistent and you shouldn't need to shim it.
|
We did adjust it and got it around .035/.040 I also sent FFE an email requesting where I can purchase a replacement sensor locally as there's no time to order one.