[C. Ludwig]

You're going to love the LR ECU once you get your head around it. Very impressed with the Syvecs we're working with. Couple of the items in the GUI aren't very intuitive, so you have to look for them. But once you get the navigation down its a nice interface. The data and what you can do with it is very impressive. The fail safes and limp trips are very nice as well.

Does the LR dash offer the same abilities to be used for inputs as the Toucan? If not, I'd go with the Toucan. You can do a lot with it via CAN to turn different functions on/off. This saves inputs and simplifies the wiring. Its not a race dash and doesn't have that "cool" factor, but its very functional. I'd also recommend looking to swap to a DBW throttle. A lot of cool stuff you can do with DBW with the ECU.

Interested to hear about support from LR. Syvecs have been fantastic at answering emails and supporting their forum. Emails sent on weekends get answered same day instead of waiting for Monday. I've gotten replies at 11pm on a Saturday, their time. Good stuff.

The car we're doing retained the OE ABS, so we added another set of wheel speed sensors for the traction control. We did this instead of attempting any electronic fix to share the signal from the OE sensors with the ABS and ECU. We used some sensors off of a Ford pickup, which mounted with minimal fab work. If you hve or will delete the ABS, you can use the OE sensors with the ECU directly. Combined that with an accelerometer we built in-house for everything you need for the traction control.