[RETed]

I just wanted to post this for reference...
(Google should pick up this thread through bots.)

I've come into owning one of these things, and the previous owner lost 3 out of 4 screws.
One was original, but a 2nd screw was just jammed in there, but it was the wrong size (and thread pitch).

I was able to finally source the true original size fasteners.
These screws hold the two "halves" of the chassis together.
There are 2 on each side for a total of 4.

Black
"Flat top" or countersunk
Phillips head
#2 - 56
1/4" long (from top of flat screw head to end of threaded end)

You can go longer, as there is nothing else in the way inside the unit.
This is the closest I've seen listed on eBay: black, Phillips head...
A seller on eBay sells #2-56 x 3/8" for 100 pieces for $6.46.
Kinda overkill in quantity though...


-Ted