Quote:
Originally Posted by scarsofcarma
Nice progress, keep it going  I want to see what this can do when its done. |
Thank you for the encouraging words. I'm hoping to be pushing into the one G plus skidpad range for grip (on a reasonable street tire) without it being glaringly obvious what I've done. The RX-7 was pretty good at close to .8 G when they came out. I'm hoping to equal or exceed most of the new high end cars for handling. That and the ability to haul it down from speed quickly.
I have never seen anyone else doing anything quite like this to a first gen. So I'm in uncharted territory as far as I know. My experience with other cars is that the unequal length A arm suspension is markedly superior to the MacPherson Strut suspension in most respects. It also allows me to tuck a really wide tire under there, and contact patch is King (for the most part) when talking handling.
I have read up on what a lot of the folks running first gens in racing have done and what they have found effective. The good part is that they have been used in racing, and winning more often than not, for so long that there is quite a bit of experience out there. Unfortunately, while their insights have been valuable, they are limited by class rules which would preclude anything remotely like what I am doing up front. The rear suspension is a blatant copy of what others have found to work on their track cars. I have merely tried to make it more livable on a street driven car.
I'm kind of itching at the bit myself to find out whether I have been inspired or that I'm a flippin' idiot. Bets could go either way at this point.