Rotary Car Club - View Single Post - 93 BB base FD build-up

Garfinkles Motor Works · 05-22-2008, 04:59 AM

When I remove the front bolt ,I put a pry bar on the fly wheel and chain it pushing foward ,remove the bolt .After tighting the bolt back you can check the step measurement between the hub and shaft to see if the bearing is in place ( 2.44 mm ) .

05-22-2008, 04:59 AM	#90
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	When I remove the front bolt ,I put a pry bar on the fly wheel and chain it pushing foward ,remove the bolt .After tighting the bolt back you can check the step measurement between the hub and shaft to see if the bearing is in place ( 2.44 mm ) .