Rotary Car Club - View Single Post

j_tso · 05-21-2008, 10:17 PM

Sure, here are more:

The top one is the water jacket I'm questioning on the non-rusty chamber iron.
The bottom one is from the iron that has the rust, which I've decided not to use.

I know I'll have to do more cleaning, but the walls appear to be intact. The top has the minute "chip", it does get to normal size at the lower end.

It's not as bad as the broken ones on this Mazdatrix page:
http://www.mazdatrix.com/faq/sidehsgs.htm

And if you go to the Rotary Resurrection forum, the rebuild write up is being sold as a set of PDFs on CD for $25.

05-21-2008, 10:17 PM	#5
j_tso Rotary Fan in Training Join Date: Mar 2008 Posts: 65 Rep Power: 18	Sure, here are more: The top one is the water jacket I'm questioning on the non-rusty chamber iron. The bottom one is from the iron that has the rust, which I've decided not to use. I know I'll have to do more cleaning, but the walls appear to be intact. The top has the minute "chip", it does get to normal size at the lower end. It's not as bad as the broken ones on this Mazdatrix page: http://www.mazdatrix.com/faq/sidehsgs.htm And if you go to the Rotary Resurrection forum, the rebuild write up is being sold as a set of PDFs on CD for $25. Last edited by j_tso; 05-21-2008 at 10:21 PM.