Progress has been slow. The front suspension is being a real pain. Lots of measuring, fitting, tack into place, and recheck. Pull it all loose, cut it apart, re-measure, re-cut, re-weld, fit, tack, repeat. I do believe it's right this time. I hope anyway as this part is getting tedious.
I had to move the lower A arms in and down again as the tires were a little too far out when the suspension was cycled up and down. It looks like hell at the moment, nothing some grinding and paint can't fix though. I can't go much further until I get the upper A arms and mount them, so I'll be removing the shock towers until I have to go to work for 2-3 months doing the harvest thing. So no progress will be made until I'm done with that.
kmember by
GySgtFrank, on Flickr