It's been awhile since I last posted on here. In the last 5 months I managed to complete the turbo swap in my 91 Fc, installed the fmic and all the piping. I got it to the point where it cranks over but does not start. I've been doing tons of reading on all of the rotary sites and still having no luck... I'm constantly tinkering with my 7 and I've replaced just about everything. New plugs & wires, injectors, ecu, all turbo sensors. Checked everything over and over again... I keep running into the same problem where the injectors just won't fire. The pump is working fine, fuel is filling the lines. I've got air pressure and spark, I can get it to run while spraying throttle/carb cleaner in the intake. But it will not start or run on its own. I've checked all of the fuses and grounds. Frustration is at full capacity whenever it comes to this project. I'm tired of spending more money on it and having no results, I'd like to start working on my 93 Fd again. Any help or input is greatly appreciated since I do all the work myself. Once again, thanks for stopping by and I'll try to upload more pics
