[TitaniumTT]

Originally Posted by Fendamonky

Ok, so I'm looking at the stuff on Summit right now, why the SUM-220071 on the radiator? Wouldn't it make more sense to have a male bung welded on? That way we could just use a standard -4 AN hose end..

Because it make pressure testing the rad that much easier.

Originally Posted by Fendamonky

Also, I had originally ordered 2x of the FRA-497104's, they came in the same box as the rest of the -4 stuff. I'll double check in the boxes downstairs to be sure we didn't accidentally overlook them.

Did not see anywhere

Originally Posted by Fendamonky

And I'm kinda thinking of just going ahead and -16ing the radiator right now, as the shop will already be welding on it... If I do that than I think I'll make two separate orders, one for coming here, and one going there.

If you're gonna do that, you're also going to need the -16 AN fittings welded onto waterpump housing as well. And if you're going that far, you might as well get rid of the T-stat housing and build a combo t-stat housing/ AST tank as opposed to the hooky way it's going to be mounted now.

Personally, I would do it that way..... oh wait... I am doing it that way on the 'vert I would've done it that way on the FC but didnt' really have the room because VMIC.