Rotary Car Club - View Single Post - How large of an exhaust is too large for a differential T-Brace?

AnthonyNYC · 02-01-2012, 05:50 AM

I'm running the larger Greddy off road setup, I had the same issue but had the shop Speedtek in Long Island weld additional mounts to the area that was touching. I also used 2 large hose clamps and attached a thick piece of silicone hose in that area in the event it ever touched again.

02-01-2012, 05:50 AM	#3
AnthonyNYC Self built and tuned... Join Date: Feb 2009 Location: West Islip, Long Island NY Posts: 14 Rep Power: 0	I'm running the larger Greddy off road setup, I had the same issue but had the shop Speedtek in Long Island weld additional mounts to the area that was touching. I also used 2 large hose clamps and attached a thick piece of silicone hose in that area in the event it ever touched again. __________________ 10.32@139MPH Stock Tranny, Stock ports, Electromotive TEC3. Self built motor and self tuned. In addition to competition engine rebuilds, also specialize in tuning, upgrades and installs. https://www.facebook.com/media/set/?...3&l=e811d7ccaf