Well well, new settings are showing potential
Low Boost setting 20psi or ~1.4bar (3rd gear RR std runs)
90kmh -140kmh = 2.32 seconds ! and 2.33 seconds ! (2 x separate tests)
EGT peak = 880 deg c to 870 deg C
Other info to down load off the ECU but will post it up later........
Car is stupid fast & effortless with new WI strategy, and will only go faster on higher boost settings.
More info (snap shot) added:
RPM 7700rpm
EGT 878 deg C
AIT 36 deg C to 40 deg C
Ambient temp 18~20 deg C
Boost 142kpa 1.45kg or 20.6psi
TIP 18.6psi
TOP 3.3psi
FP 65.8psi
Turbine rpm 107,166rpm
AFR undisclosed
WI undisclosed
Ign timing and split undisclosed
Inj duty 54%
On board power meter showed 379rwkw, car is very quick for a true road car, too fast really to be used properly without tripling any posted speed limits LOL. Anyway its got a great base to finish off the very high power/high boost work I was doing through this and last year, with much more favorable long term operating parameters on the engine and turbocharger. Next stages are back up to 1.80kg boost, 2.00kg, and 2.20kg and 2.45kg, keeping in mind the above is only on ~1.45kg to 1.5kg *waste gate spring minimum setting*
Non of this is remotely possible without the power of
water injection all mind you on a near 3 year old over 20,000km daily driven engine that has NEVER been touched! unlike some who have gone through 100k worth of engines and tunes lol.
