Rotary Car Club - View Single Post - FC3S Turbo II Diff, Hood, S5 Tail Lights, Black Interior...MORE

jfaplanet · 07-25-2011, 11:14 PM

Replying for 80leathersport, the connectors I need are the body side connectors that connect to the engine harness right above the ecu. One is bright yellow and the other is almost orange. about 6 inches of wire and the connector is all I need. They are almost impossible to get to, but they supply power to the injectors thru the engine harness. I also need the coil connectors, body side about 6 inches of wire before the connector.

Before you cut them off, I can send you pictures of the corresponding connector to make sure they are the right ones.

Thanks, Charles

07-25-2011, 11:14 PM	#7
jfaplanet Rotary Fanatic Join Date: Feb 2008 Location: Smyrna, TN Posts: 134 Rep Power: 18	Replying for 80leathersport, the connectors I need are the body side connectors that connect to the engine harness right above the ecu. One is bright yellow and the other is almost orange. about 6 inches of wire and the connector is all I need. They are almost impossible to get to, but they supply power to the injectors thru the engine harness. I also need the coil connectors, body side about 6 inches of wire before the connector. Before you cut them off, I can send you pictures of the corresponding connector to make sure they are the right ones. Thanks, Charles