Rotary Car Club - View Single Post - Moronic Tuning "Advice" WARNING! (Related to RX7Club)

RICE RACING · 03-19-2011, 04:58 PM

http://www.rx7club.com/showthread.php?t=946182

Quote by Lawyer

"I have never seen any real world proof of injecting pre compressor gives any benefit. There is plenty of speculation on the subject but very little proof, theory can only go so far... If you have proof post it up please.
Also using an IAT to measure after the compressor to show "gains" is flawed from the get go as im sure most of you know already.

Water should be directed to the combustion chambers so it can do what it needs to do, cool combustion. The best way to inject an A/I is port injection. Injecting before the throttle body does no distribute the water equally depending on manifold design. Water DOES NOT flow like air.

WHAT A TOTAL IDIOT !!!
WONDER WHY BDC HAS SUCH A FOLLOWING WITH TOTAL MORON'S LIKE THIS FLOG POSTING CRAP LIKE THIS!!!!

http://www.aquamist.co.uk/vbulletin/...t=1590&page=15

Stupid bastard needs to read this ^ thread for his "proof", only 10,000+ others know about it.

I openly blame BDC and HC for brain washing (whatever brains are left) of these types of IDIOTS who frequent that forum, searching for advice! IT NEEDS TO BE SHUT DOWN or at minimum derided at every opportunity so newbies are not scammed into reading their dribble let alone thinking their "advice" is based on any type of reality.

The internet & some forums has allot to answer for

That whole section needs to have UN sanctions imposed against it and nuked out of existence !

There is no such terminology as AI! I have never ever herd of that

until those DUMB AND DUMBER CUNTS named HC and BDC started shitting on and on and on and on and on about it and themselves! BOTH OF WHO DONT HAVE RUNNING CARS!!!!!!!! OR ANY PROOF OF THEIR OWN!!!!!!!!! OR ANY RELEVANT ENGINEERING QUALIFICATIONS!!!!!!!!!!!!! do i need to go on??????

It' is called WATER INJECTION you dummies ^ !!!

When you get one of your cars to actually run! and hold a piece of paper someone other than your forum qualifies you as having achieved a minimum educational standard in this field then please shut your arse and go back under the rocks from which you collectively came from.

Leave the real MECHANICAL ENGINEERING to us and STOP making people even dumber than what they are for needing to be tortured reading your crap.

03-19-2011, 04:58 PM	#1
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Moronic Tuning "Advice" WARNING! (Related to RX7Club) http://www.rx7club.com/showthread.php?t=946182 Quote by Lawyer "I have never seen any real world proof of injecting pre compressor gives any benefit. There is plenty of speculation on the subject but very little proof, theory can only go so far... If you have proof post it up please. Also using an IAT to measure after the compressor to show "gains" is flawed from the get go as im sure most of you know already. Water should be directed to the combustion chambers so it can do what it needs to do, cool combustion. The best way to inject an A/I is port injection. Injecting before the throttle body does no distribute the water equally depending on manifold design. Water DOES NOT flow like air. WHAT A TOTAL IDIOT !!! WONDER WHY BDC HAS SUCH A FOLLOWING WITH TOTAL MORON'S LIKE THIS FLOG POSTING CRAP LIKE THIS!!!! http://www.aquamist.co.uk/vbulletin/...t=1590&page=15 Stupid bastard needs to read this ^ thread for his "proof", only 10,000+ others know about it. I openly blame BDC and HC for brain washing (whatever brains are left) of these types of IDIOTS who frequent that forum, searching for advice! IT NEEDS TO BE SHUT DOWN or at minimum derided at every opportunity so newbies are not scammed into reading their dribble let alone thinking their "advice" is based on any type of reality. The internet & some forums has allot to answer for That whole section needs to have UN sanctions imposed against it and nuked out of existence ! There is no such terminology as AI! I have never ever herd of that until those DUMB AND DUMBER CUNTS named HC and BDC started shitting on and on and on and on and on about it and themselves! BOTH OF WHO DONT HAVE RUNNING CARS!!!!!!!! OR ANY PROOF OF THEIR OWN!!!!!!!!! OR ANY RELEVANT ENGINEERING QUALIFICATIONS!!!!!!!!!!!!! do i need to go on?????? It' is called WATER INJECTION you dummies ^ !!! When you get one of your cars to actually run! and hold a piece of paper someone other than your forum qualifies you as having achieved a minimum educational standard in this field then please shut your arse and go back under the rocks from which you collectively came from. Leave the real MECHANICAL ENGINEERING to us and STOP making people even dumber than what they are for needing to be tortured reading your crap. __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by TitaniumTT; 03-21-2011 at 04:40 PM.