Rotary Car Club - View Single Post - Twin Charged FD

RX SE7EN · 03-15-2011, 10:22 AM

Stock power steering and A/C bracket:

Cut, Cleaned, and Squared:

Aluminum mounting plate, there are two of these, this one is fixed to the bracket. The other is larger and is what the supercharger will bolt to. This bracket is only tacked together, now that I know it fits, we're going to weld it up and also add some gussets to strengthen it.

Test fit:

The larger plate (for bolting the supercharger down):

Supercharger: close to its final place, I need to trim part of the throttle mechanism bracket on the throttle body, but things are lining up nicely:

Not much room but it looks like it'll work!

03-15-2011, 10:22 AM	#3
RX SE7EN Rotary Fanatic Join Date: Feb 2010 Posts: 183 Rep Power: 16	Stock power steering and A/C bracket: Cut, Cleaned, and Squared: Aluminum mounting plate, there are two of these, this one is fixed to the bracket. The other is larger and is what the supercharger will bolt to. This bracket is only tacked together, now that I know it fits, we're going to weld it up and also add some gussets to strengthen it. Test fit: The larger plate (for bolting the supercharger down): Supercharger: close to its final place, I need to trim part of the throttle mechanism bracket on the throttle body, but things are lining up nicely: Not much room but it looks like it'll work!