Rotary Car Club - View Single Post

LunchboxCritter · 01-30-2011, 07:21 PM

I tried replacing my original switch with a "good when removed" switch. The switch that I replaced my original was worse than the orginal. It would not turn off the wipers at all (one speed).

I have replaced all three relays, and it seems to be working correctly (front, rear, intermitten, etc.). When turning the wipers off they do not return to "home". They simply stop. I am not 100% if there is any difference in speed between low and high.

Do I need a new wiper motor, or another switch?

01-30-2011, 07:21 PM	#1
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	A question about Wipers I tried replacing my original switch with a "good when removed" switch. The switch that I replaced my original was worse than the orginal. It would not turn off the wipers at all (one speed). I have replaced all three relays, and it seems to be working correctly (front, rear, intermitten, etc.). When turning the wipers off they do not return to "home". They simply stop. I am not 100% if there is any difference in speed between low and high. Do I need a new wiper motor, or another switch? __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!! Last edited by LunchboxCritter; 01-30-2011 at 07:24 PM.