|
1. Remove stock perch on replacement front struts and weld on new perches. Swap coil over collars/springs/dampers/camber plates over to new struts.
2. Install new front brake rotors and wheel bearings.
3. Install MSD 6A and 2 Jacobs coils.
4. Mount wheels and tires
5. Alignment
6. Tune the carb/set timing. Hopefully some dyno time before DGRR, but probably not.
7. Install louvers on hood and repaint.
8. Reinstall 3-point strut brace.
9. A good engine bay degreasing and interior cleaning.
|