View Single Post
Old 07-29-2010, 09:42 PM   #504
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Wow, over a week since an update... ok, so here it goes in a quickie

Got the fuel cell working tip top. The old cosmo pump that I had actually turned out to be good. Tested right where it should've, 252lph @ 43.5 psi. Cool, so that's in the lift pump position, and the supra is in the surge tank position. So far everything seems to be awesome. I built a bunch of harness adapters and clear tubing to monitor V, A, and flow and it seems to be working as it should. The last little piece that I need to build is an overflow/recirc tank if you will that I plan to mount high where the spare tire once lived. I didn't really take into account thermal expansion when I designed the damn thing. The fuel is coming back hot, expanding in the tank, and puking out the vent. Bad.

The solution is about a gallon tank mounted above the cell itself. In theory the fuel can expand into that before it heads out of the vent. When the level in the tank falls, the fuel will siphon itself back into the cell. Hopefully that will cure the last of the woes with this little project.

Got the 4.3 Torsen swapped in yesterday as well as hauled the engine, cracked the pan off to remove the shims in the bypass valve. Pressure was WAY too high. FD reg + shimmed bypass + ported galleys, + o-ring sealed pump + cold 10w30 = 150psi cold!!! So the shims came out and everything is being buttoned back up. Also pulled the engine to FINALLY install the 6-spd. It'll be alot easier to mount the slave cylinder (that will be a modded S4 TII unit) with the engine/trans out of the car. Then stab it back in and build a mount.

I made a simple jig that fit's between the u-joints and the trans tunnel and the u-joints and the floor to position the trans/engine exactely where it was with the S5TII shit box trans. This way I should be able to get everything exactely where it wants to be.

I should have everything up and running in a few days. I was hoping to get a few hours in on the girl tonight, but the 13.5 hr work day had different plans. Tomorrow is out as well as it will be a 15+hr day.... ugh. maybe Sunday... I'm only expecting about 10 Oh well, what can ya do except continue to bust ass.

If all goes well, Dyno on 8/7 and auto-x on 8/8..... fingers crossed ladies
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline   Reply With Quote