Quote:
Originally Posted by LunchboxCritter
What about having the machine shop make you some studs that are longer and match the SuperNow one's.
|
Seems more of a pain to machine five studs than drill five holes, methinks.
Quote:
Originally Posted by josh18_2k
i would just call ARP and ask them. the knurl is all that matters, so just ask for 2.5" studs with a matching knurl. the only 563 knurl i found in google is some moroso studs that say "don't use spacers" (aka poor quality)
|
So you think ARP wouldn't mind making custom studs? I suppose I could look into the Moroso ones- I need to double check the dimensions to make sure its safe. Thanks.
Quote:
Originally Posted by TitaniumTT
If that knurl protrudes the hub and makes contact with the spacer, that would be bad. But if the spacer can fit over the knurl, you should be OK.
The other thing to do could be to find an even longer stud and shorten it.
Or machine the knurl down.
|
Quote:
Originally Posted by josh18_2k
dont forget about the brake rotor  |
The 0.5630" and 0.5090" refers to respective diameters of the SuperNow and ARP studs. I realize that the diagram may be misleading. Sorry for the confusion, boys.