[TitaniumTT]

Originally Posted by 2gslse

If the pump in the pics is going to feed the surge tank why bother running the line out the top and not directly into the surge tank?(troubleshooting later???)

I thought about that but then I would need to take the pump out and disconnect it from the feed line submerged in the tank. I thought if I ran it on the top, things would be easier. Also welding fittings on a round while possible is more difficult. And if I can't stand the Bosch pump again, I can run just the denso by swapping some outside lines while I wait for a new bigger denso to drop in and if that happens I am going to smash the bosch, then pee on it, light it on fire, pee on it, hit it with my BFH, pee on it, then mabye blow it up somehow. Then sell it to someone on the evil forum with drift, slidez, etc in his user name as slightly used.

Originally Posted by Mobius

I would hazard a guess that when/if you need to pull the pump, it's much easier, cleaner, safer to undo the line to the surge tank while it is outside the tank. As opposed to trying to undo fittings inside the tank.

This is also very true

Aight ladies, I'm back behind the TIG mask for another 2 hrs or so. Hopefully get the whole thing welded up tonight with the exception of the fittings on the cartridge for the Bosch