View Single Post
Old 06-01-2010, 01:09 PM   #11
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Quote:
Originally Posted by vex View Post
I can't tell if you're telling me to drop my panties for your benefit or for me to take a dump... Or maybe both?
Both

Quote:
Originally Posted by vex View Post
Sounds like a plan. But everything you listed looks to me like they're regular ignightors. No COP or anything like that. Do you suspect any losses by going that route?
The Bosch was designed as a COP but modified to be mounted away from the plug and wires to be easily made.

Aside from building wires and the loss of a few tempers, I don't really see any losses if they're kept close enough. I would suspect that running them inside would lead to more losses than anything just because of the length of the wires.

The thing with the COP's is the mounting. Sure it can be done, but why? I think it would be easier to mount them on the frame rail or where the factory did and make some plug wires than try to mount COP's on to the rotary. Just my $.02

Quote:
Originally Posted by project86 View Post
Part number M DEN-580 to be exact
Yeah, D-580 LS1 coils, fuck those coils. Especially for you. You're going to be going for higher revs and those won't be able to handle duty cylce required. The LS2's might work, D585, but even those I'm not too sure about. I'm really hoping to get a set loaned to me, I should PM BHR about it, see if they'll help me out. I think the Bosch's that I'm using would be the best bet for you. Can be dwelled fully to 10k rpm with an acceptable duty cylce. You definaly don't want or need a CDI box though.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline   Reply With Quote