[TitaniumTT]

Originally Posted by project86

ah haha you so funny Brian. FYI its a good way to keep in touch with ppl...

Fuck that noise. Anyone that I want to be able to get in touch with me knows how to, and I like it that way.

Originally Posted by FC3S Murray

Thanks dude but I am at my final straw with the good old rotary. I am going to part out all the rotary components and this may sting a bit.............but I am dropping in an LSx motor. I am already looking at the LS3 crate motor through a Chev buddy BUT I have to research if it is a common swapped compared to the LS2.

Dude, I will kill you. That is all

With as clean as you've got your car now, it'll take you YEARS to get it to that level with any type of piston engine swap. Having just been thoroughly involved in an LS1 swap I can tell you that to get a clean engine bay and a good cooling system, it's going to take a TON of fabrication and you're going to need to re-spray your bay...... Kyle so that may not be that big a deal actually.

Originally Posted by FC3S Murray

A part of me is bummed BUT a new spark of interest has started with the thought of a new platform.

Fuck that noise.

Originally Posted by FC3S Murray

I have TOO much work into the body/chasis/suspension and wheels to get rid of this car that has been in my life for 8 years.

Damn right, that's good to hear

Originally Posted by FC3S Murray

Granted this project will no doubt take 2 years or more since my family comes first and or second child on the way makes that timeline maybe even longer.

Fuck that noise man, seriously, lets work something out so you can drive the fucking beast this year.

Originally Posted by FC3S Murray

I HAVE THOUGHT about another plate but I imagine it will crack again. My logs showed low LOW knock and AFRs all 11.0-11.2:1. I have an HKS Twin Power so my IGN system was firing pretty hot. I think the shift from 2nd gear to 3rd was such an abrupt power transfer that it just caused the motor to twist. FUCK it makes me mad! You go from 20+ WOT pulls on the highway in 3rd and 4th.....all temps great..wtr 82*C AIR 22*C oil temp 180*F and the motor doesnt give BUT you do a quick burst through the gears and CRACK lol.

Something else is amiss and I'm not sure what it is

What's your oil pump feel like? What are your oil PSI's? Your AFR's are toooooo rich for my likings and the twin fire might have done some funky things. Is that a re-spark system? If so that could've been your problem right there. I'm a big fan of inductive sparks.

What kind of HP/Tq are you expecting? I don't think you're at the level where pinning is really even thought of as needed. I think something else is going on. Cryo may be the answer for you.

Originally Posted by FC3S Murray

it was a S5 front Iron Ted. I mean what else could I use that is thicker?

I don't think you need something thicker, I think there's some other wierd shit going on.

Originally Posted by FC3S Murray

Thanks dude and I thought about hitting Brian up but he has enough on his plate PLUS Where do I go from here.........it was a S5 front plate so I guess I have to stud it. I should have just went with the REW.

Dude, if you set the engine up right, me rebuilding wouldn't take very long at all AND I can get it cryo'ed. Seriously Sean, I'll be able to get your engine here and back to you in a matter of days depending on the cryo stuff. I would without a doubt tell you to rebuild this engine, swap the ignition, lean it out a little, maybe swap out some mounts and maybe a clutch and run it. You've got too much into making a CLEAN as hell engine bay to ditch it all and start all over and not enjoy the car for a few years.... fuck that.

Originally Posted by FC3S Murray

Thanks for your words Flash, you are the 3rd person to say that to me in regards to going big. Haha the only part that blows is I never got to bear fruit for long .

You went big and something strange went wrong. That shouldn't have happened I'm telling ya man, I don't think you're at the plate cracking tq levels yet. Lets get her back

Originally Posted by FC3S Murray

Man my head is spinning with what to do.

Lets hear it guys............

I told you what to do, PM me if you wanna work something out.

Originally Posted by infernosg

Pricey, but interesting nonetheless: http://www.h1v8.com/

Fuck that, 245ft/lbs of torque? That's laughable. High revs and weight yeah, but no real power to brag about.