[sen2two]

So i added a 12v outlet in my car for various reasons. I checked it with a multimeter at the plug and its getting correct voltage, but its popping the inline fuse i put in.

I just got a simple connector and plugged it into the power side of the auto seatbelt fuse slot since I no longer have them in the car. I chose that one because it gives constant 12v power. I ran a wire to a inline fuse before reaching the 12v outlet. The 12v outlet only has two wires on it, power and ground. I grounded the one to a near by bolt. And ran the power wire from the outlet to my power source.

It pops the inline fuse pretty much instantly if i have something plugged into the outlet.

Any ideas?