Rotary Car Club - View Single Post

dudemaaan · 02-18-2010, 12:53 PM

Thought I might update this a little. I made a system for a forum member on the other thread. Redesigned a few things. Came out nice. I used push lock fittings and mounted the solenoid directly to the nozzle to eliminate any chances of dripping after shutoff. Put a meter valve so water flow can be adjusted. Opened the nozzle up to 1mm to increase flow capacity a little more. I took several closeups of the nozzle and how the solenoid is attached.

02-18-2010, 12:53 PM	#70
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	Thought I might update this a little. I made a system for a forum member on the other thread. Redesigned a few things. Came out nice. I used push lock fittings and mounted the solenoid directly to the nozzle to eliminate any chances of dripping after shutoff. Put a meter valve so water flow can be adjusted. Opened the nozzle up to 1mm to increase flow capacity a little more. I took several closeups of the nozzle and how the solenoid is attached. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!