Quote:
Originally Posted by RETed
TTT is right - lower the number should give you more lip.
The only other thing I can think of is that one of you is running the "DDC" lip design?
Work offered the DDC lip back then - it's a funky design that countersunk the bolts into a curved outer lip.
The advantages of the DDC lip is that it was stronger, but it takes away from the deep-lip look.
-Ted
|
Nope they are not counter sunk. I have seen that design online(
look at black equips pic below). I was comparing some Work Equip pics on RBwheels today and there seems to be two slight different styles of the 5 straight spoke design(not the curved one resembling the Meisters). The "style" that Rotarybeat purchased has a slightly longer spoke design and a thinner lip "face" the bolts go against. My Equips have more lip "area" and the spokes seem slightly shorter.
Check out pictures...mine is the 1st , rotarybeat 2nd
Notice how rotarybeat's equips bolt heads are very close to the lip face edge.Our wheels use the same bolts. hmmmmm