Quote:
Originally Posted by TS87FC3S
im wanting to take off the power streein pump, ac compressor, air pump, and rats nest (all emmisions actually).. any tips would be greatley appreciated and does anyone know what all to do, to do away with the rats nest, and what do i need to do when unhooking the ps from the rack? also i will probable be removing the omp and just running premix any ideas on ratio?.. and what about removal of pd i really dont want an engine fire..
|
on the pwr steering just loop the lines coming out of the rack back into the rack.
on the pulse damper i would recomend the aeromotive FPR it has a pulsedamper built in so u don't have to worry about injector leaks like u sometimes get when u just delete it. also all rotary and any modded car should have a fire extinguisher u may not need it but when u need it you will be glad.
Rats nest isn't too bad on the N/A cars but block off plates and vacuum plugs and silicone vacuum hose for the stuff u still need banzai makes great block off plates i especially like the OMP block off kit. when u delete the OMP use smokeless ashless 2 cycle normally marine 2 cycle has both these i use quicksilver that u can get at any walmart. the mixture is 1oz. per gallon of gas if you took out the OMP. If u don't remove the OMP u can still premix u just use 1/2oz. per gallon of gas. just don't forget that u have to premix the whole tank the first time u mix and after that u only mix for that gas u are about to add.