Rotary Car Club - View Single Post

Max777 · 01-10-2010, 01:07 AM

A local guy in Chicago rocks origin. Try to find one for a good price, the distributor (Touge Factory) sells it for $1000 online, and best I found was $600 from Enjuku Racing.

As far as physical fitment of the kit:

Fenders are a little different but it will be ok.
rip off all S4 moldings, kit comes with built in moldings you only need door moldings.
Rear bumper is same fitment for both S4 and S5.

HOWEVER, if you plan to daily drive your car at all, I strongly recommend ziptie mounting unless you want to pull the kit and re-glass it al the time. FRP is fragile, it will crack and shatter if you mount it rigidly and have very low ride height.

Shine Auto stuff, for example, is a little bit more flexible and last longer, but any aero is only temporary on a slammed car.

01-10-2010, 01:07 AM	#4
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	A local guy in Chicago rocks origin. Try to find one for a good price, the distributor (Touge Factory) sells it for $1000 online, and best I found was $600 from Enjuku Racing. As far as physical fitment of the kit: Fenders are a little different but it will be ok. rip off all S4 moldings, kit comes with built in moldings you only need door moldings. Rear bumper is same fitment for both S4 and S5. HOWEVER, if you plan to daily drive your car at all, I strongly recommend ziptie mounting unless you want to pull the kit and re-glass it al the time. FRP is fragile, it will crack and shatter if you mount it rigidly and have very low ride height. Shine Auto stuff, for example, is a little bit more flexible and last longer, but any aero is only temporary on a slammed car. __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 01-10-2010 at 01:37 AM.