Rotary Car Club - View Single Post

RX200013B · 11-18-2009, 02:09 PM

If you set the throttle up so that 50% on the pedal is WOT on the primaries and 0% on the secondaries (peripheral ports) and the 100% is WOT everywhere, I think you will have something.

this is what i am tring to build the winter, just a little different
t2 center SP, 6pi ends w/ bridge on the lower ports, itb's
with the 5,6 ports only open at WOT

should bring out some good torque!? i hope

11-18-2009, 02:09 PM	#89
RX200013B Rotary Fan in Training Join Date: Nov 2009 Location: idaho Posts: 37 Rep Power: 0	If you set the throttle up so that 50% on the pedal is WOT on the primaries and 0% on the secondaries (peripheral ports) and the 100% is WOT everywhere, I think you will have something. this is what i am tring to build the winter, just a little different t2 center SP, 6pi ends w/ bridge on the lower ports, itb's with the 5,6 ports only open at WOT should bring out some good torque!? i hope Last edited by RX200013B; 11-18-2009 at 02:33 PM.