|
Purchased the sleeve inserts from Pineapple.
I installed them using the pineapple instructions; red loctite and dempeling...
But because I read some horror stories about them sliding back and forth, I decided to lock them in place with a set screw.
The pictures show the inserts in place and on the closed side of the port, you can see the set screws I added.
One new concern in this entire deal is that the sleeves are now almost twice their original weight. Hopefully the actuators will not have trouble with the added weight/drag.
__________________
...shoot a mother-humpin moose, eight days of the week...
Last edited by BLKTOPTRVL; 10-24-2009 at 07:38 PM.
|